Filter
Top Products
Tool
Use
and
Care
Use clamps or other practical way to secure and support the workpiece to a
stable platform. Holding the work by hand or against your body is unstable
and
may lead to loss
of
control.
*Do
not force tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which
it
is designed.
*Do not use tool if switch does not turn
it
on or off. A tool that cannot be
controlled
with
the switch is dangerous and must be repaired.
Disconnect battery pack from tool or place the switch
in
the locked or off
position before making any adjustments, changing accessories, or storing the
tool. Such preventive safety measures reduce the risk of starting the tool
a c c
i
d e nta
I
I
y.
Store idle tools out of reach of children and other untrained persons.
Tools
are
dangerous
in
the hands
of
untrained users.
When battery pack is not
in
use, keep
it
away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause sparks, burns, or a fire.
Maintain tools
with
care. Keep cutting tools sharp and clean. Properly maintained
tools
with
sharp cutting edge are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation.
If
damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may create a risk of injury
when used on another tool.
Service
Tool
service must be performed only by qualified repair personnel. Service or
maintenance performed
by
unqualified personnel may result
in
a risk
of
injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in
the Maintenance section of this manual.
Use
of unauthorized parts or failure
to follow Maintenance Instructions may create a risk
of
shock or injury.
3