Filter
Top Products
Selecting action mode
1
For drilling, turn the change ring
so
that
the red dot
is
aligned with the DRILL
marking on the collar. If the change ring
will not come all the way, grasp the chuck
and turn the change ring again. Do not
move the red dot beyond the DRILL mark-
ing.
For screwdriving, turn the change ring
so
that the red dot
is
aligned with the
SCREW
marking on the collar.
Do
not move the red
CAUTION
:
If you use the tool when the red dot
is
not
aligned with either marking, tool damage
may result. Be sure to align properly with
either marking before operation.
I
I
I
5