Filter
Top Products
Screwdriving operation
Place the point of the driver bit in the
screw head and apply pressure to the tool.
Start the tool slowly and then increase the
speed gradually.
Release
the trigger
as
soon
as
the clutch cuts in.
holes to make driving easier and to pre-
vent splitting
of
the workpiece.
See
the
chart.
wood screw
(mm)
3.1 (1/8")
3.5 (9/64")
3.8 (5/32")
4.5 (11/64")
NOTE
:
Use
the proper bit for the head
of
the screw that you wish to use.
Make sure that the driver bit
is
inserted straight in the screw head, or the screw and/or
When driving wood screws, predrill pilot
~~~i~~l diameter
of
I
Recommended Size
bit may be damaged.
of
pilot
hole
(mm)
2.0
-
2.2
(5/64"
-
3/32")
2.2
-
2.5
2.5
-
2.8
(3/32"
-
3/32")
(3132''
-
7/64")
2.9
-
3.2
(7/64"
-
1
/8")
5.5 (7/32")
I
3.3
-
3.6
I1
18"
-
9/64")
5.1 (13/64")
3.6
-
3.9
(9/64"
-
5/32")
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work
is
prolonged.
Wait
20-30 seconds before resuming operation.
Storage
of
driver bit
When not using the driver bit, keep
it
in the storage cavity on the tool.
9