Filter
Top Products
OPERATION
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the
"OFF"
position when released
To
start the tool, simply pull the trigger.
Tool
speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop.
77-
Switch trigger
Reversing switch action
CAUTIO N:
*Always check the direction of rotation before operation
*Use the reversing switch only after the tool comes to
a
complete stop. Changing the
direction of rotation before the tool stops may damage the
tool
This
tool
has
a
reversing switch to change
the direction of rotation. Depress the
reversing switch lever from the A side for
clockwise rotation
or
from the
B
side for
counterclockwise rotation. When the switch
lever is in the neutral position, the switch
trigger cannot be pulled.
Speed change
To
change the speed, first switch off the
tool and then slide the speed change lever
to the
"11"
side
for
high speed or
"1"
side
for low speed. Be sure that the speed
change lever is set to the correct position
before operation. Use the right speed for
your
job.
Reversing switch lever
-
Clockwise Counterclockwise
Low speed
0
High speed
a
Speed change
lever
10