Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
FOR
CHARGER
&
BATTERY CARTRIDGE
I.
SAVE
THESE INSTRUCTIONS
-
This manual
contains important safety and operating instructions for battery charger.
2.
Before using battery charger, read all instructions and cautionary markings
on
(1)
battery charger,
(2)
battery, and
(3)
product using battery.
Length of Cord (Feet)
AWG Size of Cord
3.
4.
5.
6.
7.
8.
9.
IO.
11.
12.
4
25
50
100
150
18 18
18
16
CAUTION
-
To reduce risk
of
injury, charge only MAKITA Battery Cartridge
7000, 7001, 7002, 9000, 9001, 9002, 9100, 91 01, 91
02,
91 01 A, 91 02A, 91 22,
1200,1201,1202,1201A, 1202A, 1210,1211 and 1222. Other types
of
batteries
may burst causing personal injury and damage.
Do
not expose charger to rain or snow.
Use of an attachment not recommended or sold by the battery charger
manufacturer may result
in
a risk of fire, electric shock,
or
injury to persons.
To reduce risk of damage to electric plug and cord, pull by plug rather than
cord when disconnecting charger.
Make sure cord is located
so
that
it
will
not be stepped on, tripped over, or
otherwise subjected to damage or stress.
An extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result
in
a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size, and shape
b. That extension cord is properly wired and
in
good electrical condition; and
c. That wire size is at least as large as the one specified
in
the table below.
TABLE
1
RECOMMENDED MINIMUM AWG SIZE
FOR
EXTENSION CORDS FOR BATTERY CHARGERS
as those of plug on charger;