Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do
not charge Battery Cartridge when temperature
is
BELOW
10°C
(5OOF)
2.
Do
not attempt to use a step-up transformer, an engine generator or
DC
power
3.
Do
not allow anything to cover or clog the charger vents.
4.
Always cover the battery terminals
with
the battery cover when the battery
5.
A battery short can cause a large current flow, overheating, possible burns
or ABOVE 4OoC
(104OF).
receptacle.
cartridge is not used.
and even a breakdown.
(1)
Do
not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container
with
other metal objects such
(3)
Do
not expose battery cartridge to water or rain.
may reach or exceed
35"
C
(95"
F).
completely worn out. The battery cartridge can explode
in
a fire.
as nails, coins, etc.
6.
Do
not store the tool and Battery Cartridge in locations where the temperature
7.
Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always
in
an operating condition, because
it
does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT
TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool in
high
locations.
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7.
Do
not touch the drill
bit
or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5