Filter
Top Products
ADDITIONAL SAFETY
RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature is BELOW 10°C
(5OOF)
or ABOVE 4OoC (104OF).
2. Do not attempt to use a step-up transformer, an engine generator or DC power
3.
Do not allow anything to cover or clog the charger vents.
4.
Always cover the battery terminals with the battery cover when the battery
5.
A battery short can cause a large current flow, overheating, possible burns
receptacle.
cartridge is not used.
and even a breakdown.
(1
1
Do not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge
in
a container with other metal objects such
(3)
Do not expose battery cartridge to water or rain.
may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode
in
a fire.
as nails, coins, etc.
6.
Do not store the tool and Battery Cartridge in locations where the temperature
7.
Do not incinerate the Battery Cartridge even
if
it
is severely damaged or
is
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always in an operating condition, because
it
does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls, floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF
THE
TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6.
Do
not
leave the tool running. Operate the tool only
when
hand-held.
7.
Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5