Filter
Top Products
Switch action
Tool speed
is
increased
by
increasing pres-
sure
on
the trigger. To
start
the tool, simply
pull the trigger.
Release
the trigger to stop.
Switch trigger
qy
'vi
1
CAUTION
:
Before inserting the battery cartridge into the tool, always check to
see
that the switch
trigger actuates properly and returns to the
"OFF"
position when released.
Reversing switch action
This tool has
a
reversing switch to change
the direction
of rotation. Slide the revers-
ing switch to the left for clockwise rota-
tion or to the right for counterclockwise.
Reversing switch
11
\\
CAUTION
:
.Always check the direction of rotation before operation.
*Move the reversing switch only after the tool comes to
a
complete stop. Changing the
direction
of
rotation before the tool stops may damage the tool.
Speed change
To
change the speed, slide the speed change
lever
to
the
"H"
side for high speed
or
"L"
side for low speed. To slide the
speed change lever easily, pull the trigger
slightly while pushing the speed change
lever. Be sure that the speed change lever
is
set
to the correct position before opera-
tion. Use the right speed for your job.
CAUTION
:
Always
set
the speed change lever fully into the correct position. If you operate the tool
with the speed change lever positioned halfways between the
"H"
side and
"L"
side, the
tool may be damaged.
9