Filter
Top Products
2
SPECIFICATIONS
Model 6820V
Capacities
Self drilling screw .................................................................................................................................................6 mm
Drywall screw .......................................................................................................................................................5 mm
Driving shank .................................................................................................................................................. 1/4” Hex
No load speed (min
–1
) ......................................................................................................................................0 – 4,000
Overall length ......................................................................................................................................................268 mm
Net weight ..............................................................................................................................................................1.3 kg
• Due to the continuing program of research and development, the specifications herein are subject to change without
prior notice.
• Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,
therefore, also be used from sockets without earth wire.
Symbols
The followings show the symbols used for the tool. Be sure that you understand their meaning before use.
For European countries only
Noise and Vibration
ENG003-2-V2
The typical A-weighted sound pressure level is 81 dB (A).
Uncertainty is 3 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
ENH101-5
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60745, EN55014, EN61000
in accordance with Council Directives, 89/336/EEC and
98/37/EC.
Yasuhiko Kanzaki
CE 2005
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
❏ Read instruction manual.
❏ DOUBLE INSULATION
❏ Only for EU countries
Do not dispose of electric equipment together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and
its implementation in accordance with national law, electric equipment that have reached the end of
their life must be collected separately and returned to an environmentally compatible recycling facility.