Filter
Top Products
Installing the screw strip (Fig.
8
81
9)
Insert the screw strip through the screw guide. Then insert
it
through the feeder box until
the first screw reaches the position next to the driving position.
Feeder
box
Screw strip
I
Fig.
8
Removing the screw strip (Fig.
IO)
To remove the screw strip, just pull
in the direction of the arrow.
it
out
-Driving position
Fig.
I
/
I
Fig.
1(
Carry hook (Fig.
11)
The carry hook
is
convenient for hooking
the tool to your belt.
It
can be installed
on either side of the machine. To remove
it,
pull
it
out in the direction
of
the arrow
while raising. To install the hook, push
it
down until
it
"clicks" into place on the
tool.
Hook
Fig.
11
8