Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature is BELOW 10°C
(5OOF)
or ABOVE
4OoC
(104OF).
2.
Do not attempt to use a step-up transformer, an engine generator or DC power
3.
Do not allow anything to cover or clog the charger vents.
4.
Always cover the battery terminals
with
the battery cover when the battery
5.
A battery short can cause a large current flow, overheating, possible burns
receptacle.
cartridge is not used.
and even a breakdown.
(1)
Do
not touch the terminals
with
any conductive material.
(2)
Avoid storing battery cartridge
in
a container
with
other metal objects such
(3)
Do not expose battery cartridge to water or rain.
ture may reach or exceed 5OoC
(122OF).
completely worn out. The battery cartridge can explode
in
a fire.
as nails, coins, etc.
6.
Do
not store the tool and Battery Cartridge
in
locations where the tempera-
7.
Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always
in
an operating condition, because
it
does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When driving into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold
the
tool
only
by
the insulated grasping surfaces to prevent electric shock
if you drive into a "live" wire.
6.
Do not touch the bit or the workpiece immediately after operation; they may
be extremely hot and could burn your skin.
not have to be plugged into an electrical outlet.
Be sure no one
is
below when using the tool
in
high locations.
SAVE THESE INSTRUCTIONS.
5