ADDITIONAL SAFETY RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature is
BELOW
10°C
(5OOF)
2.
Do not attempt to use a step-up transformer, an engine generator or DC power
3.
Do not allow anything to cover or clog the charger vents.
4.
Always cover the battery terminals
with
the battery cover when the battery
5.
A
battery short can cause a large current flow, overheating, possible burns
or ABOVE 4OoC
(104OF).
receptacle.
cartridge
is
not used.
and even a breakdown.
(1)
Do not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge
in
a
container with other metal objects such
(3)
Do not expose battery cartridge to water or rain.
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode
in
a fire.
as nails, coins, etc.
6.
Do not store the tool and Battery Cartridge in locations where the tempera-
7.
Do not incinerate the Battery Cartridge even
if
it
is severely damaged or is
ADDITIONAL SAFETY RULES
1.
Be aware that this
tool
is always
in
an operating condition, because
it
does
2.
Don't use or leave the tool
in
damp or wet locations.
3.
Don't use in rain.
4.
Check the socket carefully for cracks or damage before operation.
5.
To prevent bolts or nuts from being damaged,
do
not overtighten them.
not have to be plugged into an electrical outlet.
SAVE THESE INSTRUCTIONS.
5