Filter
Top Products
Installing socket adapter
When you wish to use
a
smaller
size
socket,
install the socket adapter.
To
install
it,
insert the socket adapter into
the socket in the tool, making sure that the
tightening direction matches the arrow on
the tool.
To loosen the nut or bolt, turn the tool
over
(upside-down) and insert the socket
adapter into the socket in the tool.
-.
socket over the nut or bolt. Turn the
tool on and continue to tighten until
the torque limiter actuates, then
turn
Socket
adapter
I
'
Switch action
To start the tool, simply depress the switch
lever.
Release
the switch lever to stop.
Switch
lever
I
CAUTION:
Before inserting the battery cartridge into the tool, always check to
see
that the switch
Jever actuates properly and returns to the
"OFF"
position when released.
Operation
3
1.
Motor-driven semi-tightening operation
Make sure that the tightening direction
matches the arrow on the tool. Hold
the tool bv the orir, area and
dace
the
the tool
off
CAUTION
:
When operating the tool, be sure to place the socket over the nut or bolt securely.