Makita 6920NB Impact Driver User Manual


 
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool.
A
power source with voltage greater than that specified
for the tool can result
in
SERIOUS INJURY to the user
-
as
well as damage to
the tool. If
in
doubt,
DO
NOT PLUG IN THE
TOOL.
Using a power source with
voltage less than the nameplate rating is harmful to the motor.
,
ADDITIONAL SAFETY RULES
1.
Always be sure you maintain good balance and firm footing.
2.
Use care and common sense when disposing of sheared bolt tips.
Be sure no one is below when using the tool in high or elevated locations.
Falling tips from high locations or scattered tips can cause severe injury.
SAVE THESE INSTRUCTIONS.
4