Filter
Top Products
MAINTENANCE
CAUTION:
Always be sure that the tool
is
switched
off
and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both
carbon brushes should be replaced at the
same time. Use only identical carbon
brushes.
Use a screwdriver to remove the brush holder
caps. Take out the worn carbon brushes,
insert the new ones and secure the brush
holder caps.
lL
Limit
mark
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment
should be performed by Makita Authorized or Factory Service Centers, always using Makita
replacement parts.
7