Makita 8390D Drill User Manual


 
2
ENGLISH
SPECIFICATIONS
Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
Note: Specifications may differ from country to country.
GENERAL SAFETY RULES
GEA002-2
WARNING:
Read all instructions. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury. The
term “power tool” in all of the warnings listed
below refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
Personal safety
9. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
Model 8270D 8280D 8390D
Capacities
Steel 10 mm (3/8”) 10 mm (3/8”) 13 mm (1/2”)
Wood 25 mm (1”) 25 mm (1”) 36 mm (1-7/16”)
Concrete 8 mm (5/16”) 10 mm (3/8”) 13 mm (1/2”)
Wood screw 5.1 mm x 63 mm (3/16” x 2-1/2”) 6 mm x 75 mm (1/4” x 3”)
Machine screw 6 mm (1/4”)
No load speed (RPM)
High 0 - 1,200/min.
Low 0 - 350/min.
Blows per minute
High 0 - 18,000/min.
Low 0 - 5,250/min.
Overall length 214 mm (8-3/8”) 214 mm (8-3/8”) 239 mm (9-3/8”)
Net weight 1.6 kg ( 3.5 lbs) 1.7 kg ( 3.7 lbs) 2.3 kg ( 5.1 lbs)
Rated voltage D.C. 12 V D.C.14.4V D.C.18V
Standard battery cartridges
PA12, 1220, 1222, 1234,
1235
PA14,1420,1422,1434,
1435
PA18,1822,1834,1835