Filter
Top Products
Operation
A finishing sander
is
generally used to re-
move only
a
small amount of material
at
a
time. Since the quality of the surface
is
more important than the amount of stock
removed, do not bear down on the sander.
Keep the base flush with the material
at
all
times. Undue pressure may damage the
paper and shorten tool life.
CAUTION
:
0
Do
not block motor vent with your finger
or hand.
*Never run the tool without paper. You
may seriously damage the pad.
0
You can put
a
high polish on furniture or
other fine surfaces by using
a
cloth under
the sander.
6