Filter
Top Products
Installing wheel guard
When using
a
depressed center wheel
or
an
abrasive cut-off wheel, always use
a
wheel
guard. Mount the wheel guard with the tab
on the wheel guard band aligned with the
notch on the bearing box. Then rotate the
wheel guard
160
degrees counterclockwise.
Be
sure to tighten the screw securely.
Installing side
grip
(auxiliary handle)
Screw the side grip on the tool securely.
The side grip can be installed on either side
of
the tool, whichever
is
convenient.
I
Wheel
guard
5