Filter
Top Products
How
to
use
Switch action
To
start the tool, simply pull the trigger.
Release
the trigger to stop. For continuous
operation without having to keep your
finger on the trigger, just pull the trigger
and then push in the lock button with your
thumb.
To
stop the tool from lock posi-
tion, just pull the trigger again and release
it.
Mounting
belt
With the tool unplugged and the lever
pulled out
all
the way, slip the belt over
the rollers with the arrow direction on the
belt the same
as
that of tool revolution (or
belt life
is
shortened).
Belt adjustment
Flip sander over on
its
back and use the
adjustment knob to obtain equal tension
of belt over the front and back rollers.
Then plug in sander and switch
it
on, using
the adjustment
knob to center the belt
as
it
runs over the rollers.
Failure to adjust belt porperly over rollers
can result in frayed belt edges.
5