Filter
Top Products
MAINTENANCE
CAUTION:
Always be sure that
the
tool
is
switched off and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down
to the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both
carbon brushes should be replaced
at
the
same time. Use only identical carbon
brushes.
Use
a
screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert
the
new ones
and
secure
the brush holder caps.
Limit
mark
Brush
holder
cap
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should
be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
6