Filter
Top Products
P 3/ 7
Repair
[2] REPLACING
[2]-3. Unloading valve
Fig. 6
Fig. 7
Fig. 8
1) Loosen M8 Ring nut with Spanner 17, then remove Pipe 8 from Elbow 8-R1/4. (Fig. 6)
2) Loosen four M5x10 Pan head screws, then remove Front panel assembly from Frame complete. (Fig. 7)
3) Loosen two Ring nuts 6 with Spanner 13, then remove Pipe 6.
Loosen Screw and Nut (that are components of Switch assembly). Unloading valve can be removed. (Fig. 8)
M8 Ring nutElbow 8-R1/4
Pipe 8
M5x10 Pan head screw
Spring washer 5
Flat washer 5
Frame complete
Pipe 8
Front panel assy (RC1/4)
Ring nut 6 (2pcs.)
Ring nut 6
Switch assembly
Pipe 6
Nut
Unloading valve
Screw