Filter
Top Products
16
Maintenance of compressor, air set and air hose
After operation, always drain the compressor tank and the air
filter. If moisture is allowed to enter the tool, it may result in
poor performance and possible tool failure.
Check regularly to see if there is sufficient pneumatic oil in
the oiler of the air set. Failure to maintain sufficient lubrica-
tion will cause O-rings to wear quickly.
Keep the air hose away from heat (over 60°C, over 140°F),
away from chemicals (thinner, strong acids or alkalis). Also,
route the hose away from obstacles which it may become
dangerously caught on during operation. Hoses must also be
directed away from sharp edges and areas which may lead
to damage or abrasion to the hose.
To maintain product SAFETY and RELIABILITY, mainte-
nance and repairs should be performed by Makita Authorized
or Factory Service Centers, always using Makita replace-
ment parts.