Filter
Top Products
General
Tool
Handling Guidelines:
1.
Always assume that the tool contains fasteners.
2.
Do
not point the tool toward yourself or anyone whether it contains fasteners or not.
3.
Do
not actuate the tool unless the tool is placed firmly against the workpiece.
4.
Respect the tool as a working implement.
5.
No horseplay.
6.
Do
not hold or carry the tool with a finger on the trigger.
7.
Do
not load the tool with fasteners when any one of the operating controls is
8.
Do
not operate the tool with any power source other than that specified in the
activated.
tool operatingkafety instructions.
An improperly functioning tool must not be
used.
Sparks sometimes fly when the tool is
used. Do not use the tool near volatile,
flammable materials such as gasoline, thin-
ner, paint, gas, adhesives, etc.; they will
ignite and explode, causing serious injury.
The area should be sufficiently illuminated
to assure safe operations.
The area should be clear and litter- free. Be
especially careful to maintain good footing
and balance.
3