Filter
Top Products
Do
not leave the loaded tool or the air com-
pressor under pressure for a long time out
in the sun. Be sure that dust, sand, chips
and foreign matter will not enter the tool
in
the place where you leave It setting.
Do
not point the ejection port at anyone in
the vicinity. Keep hands and feet away from
the ejection port area.
*When the air hose is connected, do not
carry the tool with your finger on the trigger
or hand it to someone In this condition.
Accidental firing can be extremely dan-
gerous.
Handle the tool carefully as there is high
pressure inside the tool that can
be
danger-
ous if a crack Is caused by rough handling
(dropping or striking).
Do
not attempt to
carve or engrave on the tool.
8