Filter
Top Products
6
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
CAUTION:
• Before plugging in the tool, always be sure that the tool
is switched off.
To start the tool, press the “I ( ON )” side of the switch. To
stop, press the “O ( OFF )” side of the switch.
Speed adjusting dial
The tool speed can be infinitely adjusted between 4,000 opm
and 12,000 opm by turning the speed adjusting dial, which is
marked 1 to 5. Higher speed is obtained when the dial is
turned in the direction of number 5; lower speed is obtained
when it is turned in the direction of number 1. Refer to the fig-
ure below for the relationship between the number setting on
the adjusting dial and the kind of work.
A range: For polishing
B range: For finish sanding
C range: For regular sanding
1. Switch
1
002528
1. Speed adjusting dial
1
002529
123
4
5
4000
12000
A
B
C
Dial setting
Orbits per minute
002530