Filter
Top Products
8
pad. Be careful to align the holes in the abrasive disc with
those in the pad.
Installing dust bag
Install the dust bag on the tool so that the arrow with “UP”
indicated on the dust nozzle points upward.
Emptying dust bag
When the dust bag is about half full, switch off and unplug
the tool. Hold the tool and remove the dust bag from the dust
nozzle while pressing the push button.
After emptying the dust bag, insert the hook on the dust noz-
zle into the rectangular hole on one side of the dust bag
frame and push up the dust bag frame until it clicks into place
on the push button.
1. Push button
2. Dust nozzle
1
2
003322
1. Dust nozzle
2. Push button
1. Hook
2. Dust nozzle
3. Push button
4. Dust bag
1
2
003324
3
12
4
003325
003327