Filter
Top Products
Tool
Use
and
Care
Use
clamps
or
other practical way
to
secure and support
the
workpiece
to
a
stable platform. Holding the work by hand or against your body is unstable and
may lead to
loss
of control.
*Do not force tool. Use the correct tool for your application. The correct tool
will
do the job better and safer at the rate for which
it
is designed.
.Do not use tool if switch does not turn
it
on or off.
A
tool that cannot be
controlled with the switch is dangerous and must be repaired.
Disconnect battery pack from tool or place the switch in the locked or off
position before making any adjustments, changing accessories,
or
storing the
tool. Such preventive safety measures reduce the risk of starting the tool
a cc id e n ta
I
I
y.
Store idle tools out of reach of children and other untrained persons. Tools are
dangerous
in
the hands of untrained users.
When battery pack is not in use, keep
it
away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause sparks, burns, or a fire.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools with sharp cutting edge are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation.
If
damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended
by
the manufacturer for your
model. Accessories
that
may be suitable for one tool may create a risk of injury
when used on another tool.
Service
Tool
service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result
in
a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual, Use of unauthorized parts or failure
to follow Maintenance Instructions may create a risk of shock or injury.
3