Makita DF010DSE Cordless Drill User Manual


  Open as PDF
of 5
 
Fig. 12
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Disassembling Change lever
[3] -4. Disassembling Slide plate
Motor side
Lever off the hook of Change lever
from the groove of Switch unit (large)
with a slotted screwdriver.
Change lever can now be removed
from Switch unit (large).
Change lever
Remove Change lever from Switch unit (large) as drawn in Fig. 12.
Push Slide plate towards the hinge portion of Motor housing R until it stops.
Slide plate can be removed by pulling in the direction of the gray arrow. (Fig. 13)
Push Change lever towards
the Motor side.
Switch unit (large)
hinge portion
Slide plate
Motor housing R
Fig. 13
Circuit diagram
Fig. D-1
Tape
LED
Connector
Connector
Tape
Switch unit
(microswitch / green color)
Switch unit
(large)
Controller
Terminal
DC motor
red marking
Red
Color index of lead wires' sheath
Black
Repair
P 4/ 5
 previous