Filter
Top Products
P 4 / 8
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear Section (Cont.)
Repair
ASSEMBLING
1) Insert the arms of Change plate B through the slots in Rack 12, and then put Spur gear 29-37 between the arms of
Change plate B. (Fig. 9)
2) Insert the Pin 4 into Rack 12. Install Spur gear 29-37 to Spindle together with the parts you have assembled toRack 12.
(Fig. 10)
At this time, do not fail to set Leaf spring in place. (Fig. 10)
3) Push Rack 12 into Gear housing until it stops.
And then, install Change lever B on Gear housing
with its "I" mark which indicates low speed aligned
with the triangular mark on Gear housing. (Fig. 11)
4) Install Lock plate on Gear housing with its tail portion
inserted between the ribs on Gear housing as
illustrated in Fig. 11.
5) Assemble Gear complete with Ball bearing 606ZZ
to Gear housing as illustrated in Fig. 6.
Fig. 10
Fig. 9
Fig. 11
Rack 12
Change plate B
Spur gear 29-37
Leaf spring
Spur gear 29-37
Rack 12
with change plate B
Gear housing
Spindle
arm
Rack 12
Spur gear 29-37
Spindle
Lock plate
Change lever B
Ribs
Pin 4
Align with I.