Filter
Top Products
Maintenance
-
Before performing maintenance workswitch off the Power
Cut
(27)
and pull out the plug cap.
Always check the Power Cut before using it to make sure that
it is in good working order. In particular, make sure that the
cutting disc is properly mounted.
Operate the Power Cut only at a low noise and emission level.
For this ensure the carburetor
is
adjusted correctly.
Clean the Power Cut regularly.
Check the fuel tank cap regularly for good sealing.
Observe the accident prevention instructions issued by
tradeassociations and insurancecompanies.
NEVER
make
any modifications to the Power Cut! You will only be
putting your own safety at risk!
Perform only the maintenance and repair works described in
the owner’s manual. All other work must be carried out by
MAKITA Service.
Use only original MAKITA spares and accessories.
The use of non-MAKITA spares, accessories, or cutting discs
increases the risk of accident. We cannot accept any respon-
sibility for accidents or damage occurring in association with
the use of cutting discs or accessories other than original
M AKITA.
-
-
-
-
First
aid
For the event
of
a possible accident, please make sure that a
first aid kit is always immediately available close by. Immedi-
ately replace any items used from the first aid box.
When calling for help, give the following information:
-
Place of the accident
-
What happened
-
Number of injured people
-
Kind of injuries
-
Your
name!
I
27
SERVICE
I
28
29
10