Filter
Top Products
Side handle
The side handle can be secured in four
positions (right, left, up and down).
To secure the side handle, tighten the wing
nut securely. Never secure the side handle
in other than the above four positions.
Side grip
The side grip
is
convenient for downward
drilling or chipping operations. Screw the
side grip on the tool securely. The side grip
can be installed on either side of the tool
for right or left hand operation.
Installing or removing drill bit or other bits (bull point, etc.)
CAUTION:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the bit.
Insert the bit into the tool holder
as
far
as
it
will go, Pull out and turn the tool
retainer
180
degrees. Then release
it
to
secure the bit.
To remove the bit, follow the installation
procedure in reverse.
5