Filter
Top Products
8
To install the blade, loosen the bolt counterclockwise on the
blade holder with the hex wrench.
With the blade teeth facing forward, insert the blade into the
blade holder as far as it will go. Make sure that the back edge
of the blade fits into the roller. Then tighten the bolt clockwise
to secure the blade.
To remove the blade, follow the installation procedure in
reverse.
NOTE:
• Occasionally lubricate the roller.
Hex wrench storage
When not in use, store the hex wrench as shown in the figure
to keep it from being lost.
1. Blade holder
2. Hex wrench
3. Bolt
1
2
3
002715
1. Bolt
2. Roller
3. Blade
002716
1
2
3
1. Hook
2. Hex wrench
1
2
002727