Makita LS0714 Saw User Manual


 
2
ENGLISH
SPECIFICATIONS
Models..............................................................................................................................................LS0714 / LS0714FL
Blade diameter........................................................................................................................................190 mm (7-1/2)
Hole (arbor) diameter..............................................................................................................................15.88 mm (5/8)
Max. Miter angle ................................................................................................................................ Left 47° , Right 57°
Max. Bevel angle................................................................................................................................... Left 45°, Right 5°
Max. Cutting capacities (H x W) with blade 190 mm (7-1/2) in diameter.
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm (13/16) thick.
2: When using a wood facing 15 mm (9/16) thick.
3: When using a wood facing 10 mm (3/8) thick.
No load speed (RPM) ......................................................................................................................................6,000/min.
Laser Type (LS0714FL only)....................................................................Red Laser 650 nm, < 1mW ( Laser Class 2 )
Dimensions (L x W x H).................................................................. 670 mm x 430 mm x 458 mm (26 - 3/8 x 17 x 18)
Net weight....................................................................................LS0714: 12.5 kg (28 lbs), LS0714FL: 13.1 kg (29 lbs)
Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
Note: Specifications may differ from country to country.
For Your Own Safety Read Instruc-
tion Manual Before Operating Tool
Save it for future reference
GENERAL SAFETY PRECAUTIONS
USA007-2
(For All Tools)
1. KNOW YOUR POWER TOOL. Read the owner’s
manual carefully. Learn the tool’s applications
and limitations, as well as the specific potential
hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working order.
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4. KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
5. DON’T USE IN DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations,
or expose them to rain. Keep work area well
lighted. Don’t use tool in presence of flammable
liquids or gases.
6. KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
Miter angle
Bevel angle
45° (left) 0° 5° (right)
0°
* 45 mm x 265 mm Note1
(1 - 3/4 x 10 - 3/8)
* 60 mm x 265 mm Note 1
(2 - 3/8 x 10 - 3/8)
-----
40 mm x 300 mm
(1 - 9/16 x 11 - 3/4)
52 mm x 300 mm
(2 - 1/16 x 11 - 3/4)
40 mm x 300 mm
(1 - 9/16 x 11 - 3/4)
45° (left and right)
* 45 mm x 185 mm Note2
(1 - 3/4 x 7 - 1/4)
* 60 mm x 185 mm Note 2
(2 - 3/8 x 7 - 1/4)
-----
40 mm x 212 mm
(1 - 9/16 x 8 - 3/8)
52 mm x 212 mm
(2 - 1/16 x 8 - 3/8)
57° (right) -----
* 60 mm x 145 mm Note 3
(2 - 3/8 x 5 - 3/4)
-----
52 mm x 163 mm
(2 - 1/16 x 6 - 3/8)