Filter
Top Products
27
7. Cutting aluminum extrusion
When securing aluminum extrusions, use spacer blocks
or pieces of scrap as shown in the figure to prevent
deformation of the aluminum. Use a cutting lubricant
when cutting the aluminum extrusion to prevent build-up
of the aluminum material on the blade.
CAUTION:
• Never attempt to cut thick or round aluminum extrusions.
Thick aluminum extrusions may come loose during
operation and round aluminum extrusions cannot be
secured firmly with this tool.
8. Wood facing
Use of wood facing helps to assure splinter-free cuts in
workpieces. Attach a wood facing to the guide fence
using the holes in the guide fence and 6 mm (1/4”)
screws.
See the figure concerning the dimensions for a sug-
gested wood facing.
1. Vise
2. Spacer block
3. Guide fence
4. Aluminum extrusion
5. Spacer block
1. Aluminum extrasion
2. Guide fence
3. Spacer blocks
4. Horizontal vise
1
2
3
4
5
001844
1
2
3
4
004073
Over 15mm(9/16”)
Over 540mm(21-1/4”)
72mm
(2-13/16”)
120mm 120mm 72mm
(4-3/4”) (2-13/16”)(4-3/4”)
20mm
(13/16”)
(4-1/2” - 4-3/4”)
115 - 120mm
1
1
005233
1. Hole