Filter
Top Products
9
EXTRA CARE SHOULD BE TAKEN
TO AVOID PERSONAL INJURIES
WITH AUTOMATICALLY CON-
TROLLED COMPRESSORS
MAINTENANCE SCHEDULE
DAILY OR BEFORE EACH USE
► CHECK OIL LEVEL.
► DRAIN CONDENSATION FROM AIR RECEIVER.
► CHECK FOR ANY UNUSUAL NOISE OR VIBRATION.
► BE SURE ALL NUTS AND BOLTS ARE TIGHT.
WEEKLY
► TURN OFF ENGINE. CLEAN DUST AND FOREIGN MATTER
FROM CYLINDER HEAD, ENGINE, FAN BLADES, INTER-
COOLER AND AIR RECEIVER.
► CLEAN AIR FILTER BY OPENING AIR FILTER, REMOVING
FILTER ELEMENT AND CLEANING IT THOROUGHLY WITH
SOAPY WATER. RINSE THOROUGHLY AND ALLOW TO DRY
COMPLETELY BEFORE ASSEMBLY.
► WORN FILTERS SHOULD BE REPLACED.
► CHECK V-BELTS FOR WEAR.
MONTHLY
► INSPECT UNIT FOR LEAKS.
► TIGHTEN JOINTS IF LEAKS ARE OBSERVED.
► CHECK V-BELTS FOR PROPER TENSION.
► CHECK COMPRESSOR PULLEY AND ENGINE SHEAVE ARE
ALIGNED AND SECURELY FASTENED.
QUARTERLY OR 300 HOURS (Whichever comes rst)
► INSPECT THE AIR RECEIVER FOR CORROSION OR OTHER
DAMAGE.
► CHANGE COMPRESSOR OIL.
► REPLACE AIR FILTER (MORE OFTEN IF COMPRESSOR IS
USED NEAR PAINT SPRAYING OPERATIONS OR IN DUSTY
ENVIRONMENTS).