Makita ML700 Work Light User Manual


 
Thank you for your purchase of this Makita Rechargeable Torch.
To
use the torch effectively and obtain maximum performance, you are encouraged to
read these instructions carefully before operation. Keep the instructions to refer to later
on
as
well.
SEVEN POINTS TO REMEMBER:
1.
The finish on the reflector
is
the result
of
special surface treatment. Never remove the
lens and attempt to wipe or touch the reflector surface with your hand.
.
2.
Never attempt to short the bulb using
tweezers, metal tools, etc.
.
3.
Use only the Makita power pack (battery cartridge Model
7000).
4.
Do
not wash the torch with water or keep
it
in
a
damp place.
5.
Although the torch
is
ruggedly constructed, handle
it
gently, do not disassemble
it
6,
Check the charge
level
at
least
once
a
month, especially if you use the torch for emer-
7.
If the torch gets
wet,
dry
it
off
as
soon
as
possible before use. Be sure to switch
needlessly or forcibly twist the head.
gency purposes (in your car, etc.).
"OFF"
after using.
It
the light seems dimmer, recharge the battery pack.
HOW
TO USE
LOADING BATTERY
CARTRl
DG
E
Open the
set
plate in the heel of the torch.
It
snaps open with thumb or finger pres-
sure. The minus
(-)
terminal side should
be on the groove side of the torch barrel,
when you insert the battery pack. Slide in
pack
all
the way before snapping
set
plate
firmly back into position.
2