Filter
Top Products
11
Straight guide (optional accessory)
The straight guide is effectively used for straight cuts when
chamfering or grooving.
To install the straight guide, insert the guide bars into the
holes in the tool base. Adjust the distance between the bit
and the straight guide. At the desired distance, tighten the
hex socket bolts to secure the straight guide in place.
When cutting, move the tool with the straight guide flush with
the side of the workpiece.
Templet guide (optional accessory)
The templet guide provides a sleeve through which the bit
passes, allowing use of the tool with templet patterns.
To install the templet guide, insert the templet guide in center
hole in the base plate and secure in place with the lock nut.
003678
1. Hex socket bolts
2. Guide bar
3. Straight guide
1
2
3
003682
003689
1. Lock nut
2. Templet guide
3. Base plate
4. Router bit
1
2
3
4
003693