Filter
Top Products
Unpacking
and
Checking
Contents
TABLE
OF
LOOSE PARTS
Basic saw assembly
...................................
Owners Manual
.........................................
Loose Parts Bag
Containing the following parts:
Blade Change Rod
.....................................
Hex Wrench
"L"
.........................................
Saw blade
.................................................
TOOLS
NEEDED
FOR ASSEMBLY
QTY
1
1
1
1
6
COMBINATION SQUARE MUST BE TRUE
Straight
E-
d
BoWd
-
-
W4"
mi,
This
E*
Mu.(
k
PertuAy
Stnmt.
Medium Screwdriver Phillips Screwdriver
Draw
Light Line
On
Board
Along
This
Edge
I
Combination square
10
mm Wrench
LJ.
WARNING: To avoid injury from unexpected start-
ing or electrical shock, do not plug the saw in until all
assembly and alignment steps are complete. The
power cord must remain unplugged whenever you
are working on the saw.
Hose
--
In
111
Should
Be No'Gap Or Overlap
Here
When
Square
Is
Flipped
Over
In
Dotted
Position
The Scroll Saw is shipped complete in one carton.
Separate all parts from packing materials and check each
item with illustration and 'Table
of
Loose Parts". Make
certain all items are accounted for, before discarding any
packing material.
NOTE: Insert the hose to air diaphragm before starting.
assemble the scroll saw, plug
in
the power cord or
turn the switch on until the missing parts are obtained
and installed correctlv.
5