Filter
Top Products
3
apparatus.
Use and care for laser level
To use the laser level properly and keep your work
accurate:
The laser level must be set where it is not exposed to
rain.
Do not expose the laser level to extreme temperatures
and temperature variations.
The laser level is a very precise measuring instrument.
Handle the laser level very carefully not to drop it or give
strong impacts to the outside of the tool-body.
Always check the accuracy of laser before use.
For a better visibility of the laser-beam line, Receiver is
available as an optional accessory. Use the receiver
when it is difficult to see the laser-beam line.
Battery life indicator LED (yellow) indicates that the
batteries become weak.
Replace all the batteries (2 pieces) at one time with new
alkaline ones.
When you finish your work, always be sure that the laser
level is switched off and the laser-beam lines is not
projected.
Always keep the laser level in the carrying case when it
is carried.
Explanation of general view
1. Operating-mode selecting buttons
(H, 2V,2V/H)
2. Interior/exterior mode change button
3. Exterior mode indicator LED (green)
4. Round vial with backlight
5. Battery life indicator LED (yellow)
6. Exit opening for vertical laser beam
7. Exit opening for horizontal laser beam
8. Fine rotation-adjusting knob
9. Level adjusting ring
10. Tripod connection
11. Exit opening for plumb laser beam
12. Power switch (Switch lock provided)
13. Battery cover
14. Tool-strap
123
4
9
11
10
6
7
8
5
12
13
14