Filter
Top Products
UT-300 Si
Regulatory Information
Description
Principles of Operation
Declaration of Conformity
(According to EN 45014)
Manufacturer’s Name:
Master Appliance Corp.
Manufacturer’s Address:
2420-18th Street
Racine, WI 53402 U.S.A.
Declares that the following product:
Product Name: UT-300Si
Conforms to the following
product specifications:
Safety Directives:
EN 123 12.81
EN 292 parts 1&2 EN 294
Quality Department
Master Appliance Corp.
FAX (262) 633-9745
Set contents
1. Tool
2. Plastic cap
3. Operation manual
Specification
Size (with soldering tip):
7.32 in. x 6.77 in.
(186mm x 172mm)
Weight when gas filled:
Approx. 352 gr.
Temperature values:
Soldering tip end…
approx. 932°F/500°C
Hotblow tip end…
approx. 1112°F/600°C
Gas container capacity:
80 c.c.
Operating time per filling:
More than 3 hours
IMPORTANT:
Please read and
understand all
instructions before
using this tool. Become familiar
with all controls for your safety.
Gas open/close knob
Soldering tip
Windows
Tip-housing
Knurled nut
Stand
Shutter Lever
Gas level
window
Gas refill nozzle
This product uses a catalytic gas reaction
system. The special catalyst contained in the
tip is preheated with a butane flame. The
preheated flame is extinguished when the
shutter is closed over the ignition vent.
Butane gas continues to flow over the
preheated catalyst generating infrared heat
which is either conducted through the soldering
iron tip or passed through the heat tip as hot gas.
Tinned
Hot Air Vent Catalyst
Evaporated
Gas
Chrome Plated Copper Base
Iron Plated
Fill with Ultratane
™
Butane
Use only Master Ultratane butane with your Ultratorch.
Do not fill gas or store near open flame, heater, furnace or
combustible materials.
Fill gas holding the unit firmly with the refill nozzle pointed
upwards. Gas will overflow from nozzle when tank is full.
Ignition button
Protective Cap