Filter
Top Products
Optional Accessories
Ultratane™ Butane
“ULTRA-REFINED” by Master…the only approved butane for Ultratorches.
• Single piece universal tip
• Purest refining method possible
• Special non-clogging formula to permit extended use
One Full Year Warranty
Your butane powered heat tool was
carefully tested and inspected
before it was shipped from the
factory.We warrant this product to
be free from defects in materials
and workmanship under normal
use and service for one year from
date of purchase. In the event of a
defect in materials or workmanship,
we will either repair or replace,
without charge, at our option, any
part which in our judgement shows
evidence of such defect.
This warranty does not apply to the
attachments, tips, burner, or ejector,
which are items requiring periodic
replacement, nor does it apply if
the butane powered heat tool has
been misused, abused, altered,
tampered with, or used with butane
fuel other than Master Appliance
Ultratane butane fuel. At the end of
the warranty period, Master
Appliance shall be under no further
obligation, expressed or implied.
Some states do not allow limita-
tions on how long an implied
warranty lasts, so the above
limitation may not apply to you.
Master Appliance assumes no
responsibility for and this warranty
shall not cover any incidental or
consequential damages from any
defect in this product or its use.
Some states do not allow the
exclusion or limitation of incidental
or consequential damages, so the
above exclusion may not apply
to you.
This warranty gives you specific
rights and you may also have other
rights which may vary from state
to state.
For warranty repair a proof of pur-
chase receipt or other appropriate
proof of date is required with your
return for warranty repair to Master
Appliance. All warranty claims must
be made to Master Appliance and
not the distributor. We decline
responsibility where repairs have
been made or attempted by others.
Any different guarantee made by
others is not authorized by us. If a
warranty claim is to be made
please return your Master Heat
Tool prepaid, with proof of pur-
chase and a note describing the
problem to our Repair Department.
The Department of Transportation
Hazardous Material Regulations
forbid this item or any other flam-
mable gas item from being shipped
via air.
Please empty tool of
butane before shipping
as described in this manual under
“How to Empty Tank of Butane Gas
if Needed”. See address below.
For repair service we charge a flat
rate fee. Please call Master
Appliance for the flat rate charge.
return your Master Heat Tool
prepaid, with a note describing
the problem to:
Master Appliance Corp.
Attention: Repair Department
2420 - 18th Street
Racine, Wisconsin 53403
Phone (262) 633-7791
Fax (262) 633-9745
web: www.masterappliance.com
e-mail: sales@masterappliance. com
Form #53073
Protective Cap
72-01-07
1.5mm tapered pyramid soldering tip
72-01-14
soldering tip adaptor
(5mm dia. x 0.8mm pitch)
72-01-01
3mm dia. tapered needled soldering tip
72-01-12
4mm dia. chisel soldering tip
72-01-02
10mm dia. chisel soldering tip
72-01-11
7mm dia. chisel soldering tip (std)
72-01-03
4mm dia. spade soldering tip
72-01-13
12.5mm dia. spade soldering tip
72-01-05
1.5mm dia. tapered needle soldering tip
72-01-06
4mm dia. micro spade soldering tip
72-01-51
5.6 O.D./3.6 I.D. (mm)
72-01-52
8.8 O.D./6.6 I.D. (mm)
72-01-53
11.5 O.D./9.7 I.D. (mm)
72-52U
72-01-55 (std)
78-02
Heat Shrink
Attachment
Heat Tips
Carrying Strap
Soldering Tips
Outside diameter
Inside diameter
P/N 51773 - 5.125 oz.
P/N 10448 - 26gm. canisters