Filter
Top Products
Ultratane™ Butane
“ULTRA-REFINED” by Master…the only approved butane for Ultratorches.
• Single piece universal tip • Purest refining method possible
• Special non-clogging formula to permit extended use
MSDS Sheet available upon request or see our website for your convenience.
La fiche de renseignements sur la sécurité du produit est disponible sur demande;
vous pouvez également la trouver sur notre site web.
La MSDS (Hoja de datos de seguridad de materiales) está a su disposición sobre
pedido o vea nuestro sitio Web para su comodidad.
Regulatory Information • Avis réglementaires • Información de reglamentos
Declaration of Conformity
(According to EN 45014)
Manufacturer’s Name:
Master Appliance Corp.
Manufacturer’s Address:
2420-18th Street
Racine, WI 53402 U.S.A.
Déclaration de conformité
(Selon EN 45014)
Nom du fabricant :
Master Appliance Corp.
Adresse du fabricant :
2420 - 18th Street
Racine, WI 53403 États-Unis
Declaración de conformidad
(Según EN 45014)
Nombre del fabricante:
Master Appliance Corp.
Dirección del fabricante:
2420 - 18th Street
Racine, WI 53403 E.U.A.
Declares that the following
product:
Product Name: UT-40Si
Conforms to the following
product specifications:
Safety Directives:
EN 123 12.81
EN 292 parts 1&2 EN 294
Déclare que le produit suivant :
Nom du produit : UT-40Si
Est conforme aux caractéris-
tiques suivantes :
Consignes de sécurité
EN 123 12.81
EN 292 Parties 1 et 2, EN 294
Declara que el siguiente
producto:
Nombre del producto: UT-40Si
Está en conformidad con las
siguientes especificaciones:
Directivas de seguridad:
EN 123 12.81
EN 292 Partes 1 y 2, EN 294
Quality Department
Master Appliance Corp.
FAX (262) 633-9745
Département qualité
Master Appliance Corp.
FAX 1 262 633 97 45
Departamento de calidad
Master Appliance Corp.
FAX 1 262 633 97 45
Standard Accessories
One Full Year Warranty
Your butane powered heat tool was carefully tested
and inspected before it was shipped from the factory.
We warrant this product to be free from defects in
materials and workmanship under normal use and
service for one year from date of purchase. In the
event of a defect in materials or workmanship, we will
either repair or replace, without charge, at our option,
any part which in our judgement shows evidence of
such defect.
This warranty does not apply to the attachments, tips,
burner, or ejector, which are items requiring periodic
replacement, nor does it apply if the butane powered
heat tool has been misused, abused, altered, tampered
with, or used with butane fuel other than Master
Appliance Ultratane butane fuel. At the end of the war-
ranty period, Master Appliance shall be under no fur-
ther obligation, expressed or implied. Some states do
not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you.
Master Appliance assumes no responsibility for and
this warranty shall not cover any incidental or conse-
quential damages from any defect in this product or
its use. Some states do not allow the exclusion or lim-
itation of incidental or consequential damages, so the
above exclusion may not apply to you.
This warranty gives you specific rights and you may also
have other rights which may vary from state to state.
For warranty repair a proof of purchase receipt or
other appropriate proof of date is required with your
return for warranty repair to Master Appliance. All
warranty claims must be made to Master Appliance
and not the distributor. We decline responsibility
where repairs have been made or attempted by oth-
ers. Any different guarantee made by others is not
authorized by us. If a warranty claim is to be made
please return your Master Heat Tool prepaid, with
proof of purchase and a note describing the problem
to our Repair Department. The Department of
Transportation Hazardous Material Regulations forbid
this item or any other flammable gas item from being
shipped via air. Please empty tool of butane before
shipping as described in this manual under “How to
Empty Tank of Butane Gas if Needed”.
See address below.
For repair service we charge a flat rate fee. Please
call Master Appliance for the flat rate charge. return
your Master Heat Tool prepaid, with a note describ-
ing the problem to:
Master Appliance Corp.
Attention: Repair Department
2420 - 18th Street
Racine, Wisconsin 53403
Phone (262) 633-7791
Fax (262) 633-9745
web: www.masterappliance.com
e-mail: sales@masterappliance. com
Heat Shrink Attachment
91-01-53
hot knife tip
91-01-01
1 mm dia. tapered needle
soldering tip
SOLDERING TIP
91-01-52
4.7 mm I.D./ 6.0 mm O.D.
HEAT TIP
91-01-02
2.4 mm dia. chisel
soldering tip
91-01-50
1.5 mm I.D./ 1.8 mm O.D.
HEAT TIP
SOLDERING TIPS
91-01-04
5 mm dia. chisel
soldering tip
70-01-55
Protective Cap
91-02
91-01-03
2 mm dia. spade
soldering tip
P/N 51773
5.125 oz. (151ml)
P/N 10448
26 g. canisters
Optional Accessories
Accessoires de série
Accesorios de norma
Accessoires en option
Accesoros opcionales