Metabo E 130 Welding System User Manual


 
7
ENGLISH
1. Please Read First!.......................7
2. Safety Information ......................7
2.1 Specified conditions of use...........7
2.2 General safety information............7
2.3 Symbols on the machine ..............7
3. Operating Elements....................8
4. Preparing for Operation .............8
4.1 Placing the machine .....................8
5. Operation.....................................8
5.1 Manual arc welding.......................8
5.2 TIG welding...................................8
5.3 Shutting down...............................9
6. Maintenance................................9
7. Available Accessories...........9/31
8. Repairs.........................................9
9. Environmental Protection..........9
10. Disorders .....................................9
11. Trouble Shooting ........................9
12. Technical Specifications..........10
These instructions are written in a way
that will enable you to safely use the
machine in a minimum of time. Here is
how to read the instructions:
Read these instructions completely
before use. Pay special attention to
the safety information.
These instructions are intended for
skilled arc weldors or other special
-
ists of similar qualification.
Keep all documents supplied with
the machine for future reference.
Retain proof of purchase for possi
-
ble warranty claims.
If you hire out or sell this machine be
sure to hand over all documents
supplied with the machine.
The equipment manufacturer is not
liable for any damage arising from
disregard of these instructions.
The information in these instructions is
marked as under:
Danger!
Warning of personal
injury or environmental
damage.
Risk of electric shock!
Risk of personal injury
by electric shock.
Caution!
Risk of material damage
Note:
Supplementary informa-
tion.
Numbers in illustrations (1, 2, 3, ...)
indicate component parts;
are consecutively numbered;
refer to the corresponding num-
bers in brackets (1), (2), (3) ... in
the neighbouring text.
Instructions to be carried out in
sequence are numbered.
Instructions which can be carried
out in any sequence are preceded
by a bullet (•).
Listing are preceded by a M-dash (–).
2.1 Specified conditions of
use
This welding machine is intended for
welding all metals.
The welding machine and the accessory
kit supplied conform to the relevant regu-
lations applicable at the time of delivery.
This welding machine is intended for
operation by professional arc weldors or
specialists of similar qualification.
Permissible welding processes:
Manual arc welding
TIG DC (with optional accessories)
for all metals, except aluminium.
For machine performance see “Techni-
cal Specifications”.
Any other use is not as specified and
prohibited.
Unspecified use, modification of the
machine or use of parts not tested and
approved by the equipment manufac
-
turer could cause unforeseeable dam-
age!
2.2 General safety informa-
tion
When using this machine, observe
the following safety instructions to
exclude the risk of personal injury or
material damage.
Follow the specific safety instruc-
tions in the respective chapters.
Follow the legal directives or regula-
tions for the prevention of accidents
pertaining to the handling of arc
welding machines.
B
Danger!
Electric potential!
Use the machine indoors and in dry
environment only.
Connect the machine only to a prop-
erly earthed outlet.
If in doubt check with a qualified
electrician!
Service and repairs to the machine
must only be made by qualified elec
-
tricians.
Unplug before removing the
machine's cover.
A
Danger!
Wear sufficient protective clothing
when welding.
Always use a welding visor and
welder's gloves.
They provide protection against fly-
ing sparks and arc radiation.
All metal fumes are detrimental to
health!
When working indoors ensure suffi-
cient ventilation and extraction in
order to not exceed the max. per-
missible workplace pollutant con-
centration.
The fumes of lead, cadmium, cop-
per, chromium, nickel, zinc and
beryllium are particularly harmful!
A
Caution!
Never weld earthed metal.
Welding earthed metal may cause
damage to the protective earth con-
ductors by stray currents.
Never use the welding machine for
thawing pipes.
Always attach the earth cable
directly to the weld metal and as
close as possible to the welding
spot.
Always carry the welding machine at
the carrying strap when transport-
ing it.
Special care is required when work-
ing near computers, electronically
controlled equipment or in the prox-
imity of magnetic data media (sound
recording tapes, floppy disks, data
recording tapes, credit cards, etc.).
The arc start can cause misfunction
of this type of equipment or data
loss.
2.3 Symbols on the machine
Arc welding with coated
stick electrodes
Tungsten Inert-gas Welding
(TIG welding)
Table of Contents
1. Please Read First!
2. Safety Information
XS0015E.fm Operating Instructions DEUTSCH