Filter
Top Products
ENGLISHen
10
screw), including:
C Clamping bracket 6.27107 for safe securing to
the work bench (tighten clamping screw).
D Battery chargers: ASC 15, ASC 30 and others.
E Battery packs: 4.0 Ah (6.25527); 3.0 Ah (6.25455)
For a complete range of accessories, see
www.metabo.com or the catalogue.
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Special instructions for cordless machines:
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-
circuiting (e. g. by protecting them with adhesive
tape).
Explanation of details on page 3. Subject to
changes serving technical progress.
U =Voltage of battery pack
S =Spindle lock for easy tool changes
n =No-load speed (maximum speed)
n
1
=On-load speed
I
120 V
= Current at 120 V
P
1
=Nominal power input
P
2
=Power output
D
max
=maximum grinding wheel diameter
d = Collet bore of the collet chuck
m =Weight with smallest battery pack/weight
without cord
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Wear ear protectors!
Electromagnetic disturbances:
In individual cases, the speed may fluctuate tempo-
rarily if the machine is exposed to extreme external
electromagnetic disturbances or the electronic
restart protection may respond. In this case, switch
the machine off and on again.
10. Repairs
11. Environmental Protection
12. Technical Specifications