Metra Electronics 98-8999 Power Screwdriver User Manual


  Open as PDF
of 4
 
1
98-8999
POCKET ASSEMBLY
B2
A
B
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Snap Pocket Trimplate MIT onto
the front of the Pocket. Locate one
of the Left Brackets and mount it
to the “L” side of the Pocket with
(2) #6 x 1/4" Phillips Flat Head
Screws
. Next locate one of the
Right Brackets and mount it to
the “R” side of the Pocket with
(2)
#6 x 1/4" Phillips Flat Head
Screws.
(Figure A)
2
Mount the factory brackets to the
shaded bosses (Fig. B2) with
(4) #8
x 1/4" Phillips Pan Head Screws
supplied and mount the entire
assembly to the sub-dash.
(Figure B)
3
MITSUBISHI POCKET
 previous next