Filter
Top Products
3
98-8999
POCKET ASSEMBLY
A
B
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Snap Pocket Trimplate VW (labeled
TP-9008) onto the front of the
Pocket. Locate the X-5599L
Bracket and mount it to the “L”
side of the Pocket with (3) #6 x
1/4" Phillips Flat Head Screws
.
Next locate the X-5599R Bracket
and mount it to the “R” side of the
Pocket with
(3) #6 x 1/4" Phillips
Flat Head Screws.
(Figure A)
2
Pull out the plastic tray separating
the dash cavity and remove the tray
(“A”). Position the
Pocket so each
bracket is configured with (2) screws
on the top and (1) screw on the bot-
tom
(“B”). Slide the pocket into the
dash opening until the side clips
engage.
(Figure B)
3
VOLKSWAGEN POCKET
1-800-221-0932
REV
. 08/12/08 © COPYRIGHT 2002-2008 METRA ELECTRONICS CORPORA
TION INST98-8999
www.metraonline
.com
K
NOWLEDGE IS
P
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.