Miller Electric 185 DX Welding System User Manual


 
. Complete Parts List available at www.MillerWelds.com
OM-4415 Page 13
4-2. Dimensions, Weights, And Operating Angles
Dimensions
Height 22-3/4 in (578 mm)
D
Width 22-3/4 in (577 mm)
D
Depth 31-5/8 in (803 mm)
Do not move or o
p
erate unit
A 31-5/8 in (803 mm)
B
Do not move or operate unit
where it could tip.
B 10-9/16 in (268 mm)
Do not exceed tilt angles or en-
gine could be damaged or unit
C 13-25/64 in (340 mm)
gine could be damaged or unit
could tip.
D 22-3/4 in (577 mm)
A
E 1-9/16 in (40 mm)
A
C
F 19-5/8 in (498 mm)
C
G 13/32 in (10 mm) Dia.
Weight
G
15°
15°
DX Model: 315 lb (143 kg)
4
Hl
G
15°
15°
Standard Model: 267 lb (121 kg)
Holes
15
F
Optional Lifting Eye
Weight Rating
803 403
Engine End
F
E
803 597B
430 lb (195 kg)
Continuous Welding
4-3. Duty Cycle
220 626A
Duty cycle is the percentage of 10
minutes that unit can weld at rated
load without overheating.
NOTICE Exceeding duty cycle
can damage unit and void warranty.
100% Duty Cycle at 100 Amperes CC/DC
20% Duty Cycle at 185 Amperes CC/DC
2 Minutes Welding 8 Minutes Resting
% DUTY CYCLE
WELD AMPERES
0102030405060708090100
0
20
40
60
80
100
120
140
160
180
200