Filter
Top Products
Low noise operation allows for better
work site communication and safety.
72 db @ 7 m (no load—idle),
78 db @ 7 m (full load—high speed).
Processes
MIG (GMAW)
Flux Cored (FCAW)
Stick (SMAW)
TIG (GTAW)
Air Carbon Arc (CAC-A)
Cutting and Gouging
thru 1/4 in Carbons
Air Plasma Cutting
and Gouging with Optional
Spectrum Models
Output Range CC/DC: 20–350 A
CV/DC: 10–34 V
CC/AC: 35–250 A
Weld Output Rated at 104˚ F (40˚ C)
CC/DC and CV/DC: 300 A at 32 VDC, 100% Duty Cycle
350 A at 28 VDC, 60% Duty Cycle
CC/AC: 200 A at 25 VAC, 60% Duty Cycle
Generator Power Rated at 104˚ F (40˚ C)
12,000 watts continuous
Weight Net: 998 lb (453 kg)
Quick
Specs
Trailblazer
®
Pro 350 D
Diesel Engine-Driven
Welder/Generator
Issued March 2006 • Index No. ED/4.65
The professional welder’s choice with higher outputs is
designed to deliver the best arc performance with enough
weld power to dominate larger diameter flux cored wires
and air carbon arc gouging thru 1/4 in carbons.
Weld at Idle
™
—lock in idle and weld in
DC up to 180 A.
12,000 watts of generator power is
regulated to provide constant, strong
power and very good motor starting
characteristics. Power is independent
of weld control settings so that the
correct voltage is available at all times.
Even better weld performance
with an arc that dominates the
competition. In Stick mode, you
get a smooth E7018 and a great
E6010 arc with Arc-Drive and
Hot Start
™
standard. Great
MIG/FCAW arc and machine idles
with feeders hooked up. More
stable AC TIG and excellent starts
in DC scratch start TIG.
The Power of Blue
®
.
Welder/generator is warranted for 3 years, parts and labor.
Engine is warranted separately by the engine manufacturer.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Industrial Applications
Mechanical Contractors
Rig Owners
Structural Steel Work
Process Plant Piping
Fabrication
With a compact and lightweight
design at only 998 lb, a smaller
truck can be used, and related
transportation costs will be reduced.
Low height allows the driver to see
over the machine when mounted
on a truck bed and the machine fits
sideways in a standard pickup.
Weld meters now standard.
Automatic Start at Idle
™
idles engine
immediately when started, extending
engine life and reducing
fuel consumption and noise.
Toolless top and side engine access
allows easy and faster maintenance
with little clearance space needed.
Toolless remote oil drain is standard.
Standard 14-pin receptacle easily
connects feeders or remote controls
for enhanced process operation.
Automatic idle in all processes,
including MIG/FCAW with feeders
to save fuel and reduce noise.
26 HP, 3-cylinder Kubota diesel
engine with its durable, proven
liquid-cooled design is the world
standard for small diesel engines.
Engine shutdowns standard.
Cold weather starting aids such as
standard glow plugs and block heater
ensure good starts in cold weather.
Strong 120/240 V power while welding
to run tools and inverter welders. See
page 3 of literature.