Filter
Top Products
5
Genuine Miller Accessories
(Continued)
MIG/Flux Cored Welding (Continued)
Spoolmatic
®
30A #130 831
A 1-lb, air-cooled spool gun that extends
the weld process range by adding a handy
portable system for small wire MIG. Rated
200 A at 100% duty cycle. Includes 30 ft
(9.1 m) cable assembly. WC Control
required. See Lit. Index No. M/1.5.
WC-24 Control #137 549
To be used with Spoolmatic 30A.
XR Wire Feeders and Guns
Push-pull system designed to handle
difficult-to-feed soft alloy wires such as
aluminum. See Lit. Index No. M/1.7.
MIG (GMAW)/Flux Cored (FCAW) Guns
Miller produces a complete line of
dependable MIG guns. Check literature
for complete details. See Lit. Index Nos.
AY/16.0 and AY/17.0.
Stick (SMAW) Welding
Weld Leads
#173 851 2/0, 350 A, 100% duty cycle,
50 ft (15.2 m) stinger, 50 ft (15.2 m)
work cable.
#043 952 2/0, 300 A, 100% duty cycle,
100 ft (30.5 m) stinger, 50 ft (15.2 m)
work cable.
TIG (GTAW) Welding
HF-251 Series
#042 388 HF-251D-1, 115 VAC
High-frequency arc starter and stabilizer.
See Accessory Literature, Index No. AY/5.0.
Remote Controls and Switches
RFCS-14 HD Foot Control #194 744
For all Miller solid-state power sources
after serial number JK674521. This new
design increases stability with a larger
base, and durability with a heavier cord.
Maximum flexibility is accomplished with a
reconfigurable cord that can exit the front,
back or either side of the pedal. Foot pedal
provides remote current and contactor
control. Includes 20 ft (6 m) cord and
14-pin plug.
RHC-14 Hand Control #129 340
Miniature hand control for remote current
and contactor control. Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
RCC-14 Remote Contactor and Current
Control #151 086
Rotary-motion fingertip control. Fastens to
TIG torch using two Velcro strips. Allows
complete current and contactor control at
operator’s fingertips. Includes 28 ft (8.5 m)
cord and plug.
Extension Cords for 14-Pin
Remote Controls
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.9 m)
PRHC-14 Hand Control #195 511
For all solid-state power sources after
serial number JK674521. Complete current
or voltage control brings 120 volts GFCI
power to work area in a single cord.
Housed in a durable light aluminum case
and includes 125 ft (38 m) cord with plugs.