Filter
Top Products
No. 37 Running Gear #195 282
Includes two 10 in (254 mm) wheels, two
5 in (127 mm) casters, two-compartment
rack (for gas cylinder(s) or Coolmate V3
coolant system), and handles. Provides
excellent mobility and easy to install.
Protective Cover #195 320
Heavy-duty, water- and mildew-resistant.
Protects and maintains the finish of
the welder.
Remote Controls and Switches
RCCS-14 Remote Contactor and
Current Control #043 688 14-pin plug
North/south rotary-motion fingertip control
fastens to TIG torch using two Velcro
®
straps. Great for applications that require a
finer amperage control. Includes 26.5 ft (8
m) control cord.
RFCS-14 HD Foot Control #194 744
Maximum flexibility is accomplished with a
reconfigurable cord that can exit the front,
back or either side of the pedal. Foot pedal
provides remote current and contactor
control. Includes 20 ft (6 m) cord and 14-
pin plug.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
Dimensions:
4 x 4 x 3-1/4 in
(102 x 102 x 83 mm). Includes 20 ft (6 m)
cord and 14-pin plug.
RMLS-14 Switch #129 337
Momentary- and maintained-contact rocker
switch for contactor control. Push forward
for maintained contact and backward for
momentary contact. Includes 26.5 ft (8 m)
cord and 14-pin plug.
RMS-14 On/Off Control #187 208
Momentary-contact switch for contactor
control. Rubber-covered pushbutton dome
switch ideal for repetitive on-off
applications. Includes 26.5 ft (8 m) cord
and 14-pin plug.
Extension Cords for 14-Pin Remote Controls
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (23 m)
Gas Tungsten Arc (TIG) Welding Book
#170 555
To order this item, distributors can call
the Miller Literature Distribution Center at
1-920-735-4356, or FAX 1-920-735-4011.
86 pages — 8-1/2 x 11 in. A comprehensive
text on all aspects of the GTAW process.
Filled with figures and tables to illustrate
process technique and equipment setup.
Glossary of TIG terms also provided.
TIG Training CD #196 567
Designed for anyone who’s looking to
better understand the TIG process. Easy
to understand instruction, proven teaching
steps, and expert advice help to create a
more effective academic approach to training.
Subject areas covered include system
components, process fundamentals, electrical
theory, safety, power source operation.
Video– GTAW Setup Procedures #108 241
To order this item, distributors can call
the Miller Literature Distribution Center at
1-920-735-4356, or FAX 1-920-735-4011.
13:00 minutes. A detailed demonstration
on preparing your equipment for TIG
welding. Uses a Syncrowave 250 power
source, but topics fit any TIG setup
including air-or water-cooled systems.
In-depth discussion of tungstens and gases.
6
Genuine Miller Accessories
Genuine Miller Options
Field Options
Sequencer Module #195 345 Field Kit
Provides a starting current higher or lower
than the welding current. Provides final slope
and final current for trailing the weld. Provides
a spot timer for TIG spot application.
Pulser Module
#195 344 Field Kit for Syncrowave 250 DX
For welding of thin materials. Provides a
heating and cooling effect of the weld
puddle to reduce heat input and control
distortion of the material. Provides 0.25 to
10 pulses per second.
Power Factor Correction Kit
#194 692 Field Kit for Syncrowave 250 DX
#043 757 Field Kit for Syncrowave 350 LX
Reduces primary amperage draw by
approximately 25% allowing the use of
smaller breakers/fuses and smaller primary
cord. Power Factor
does not
reduce the
power consumption/electrical bill.